Basic Basics: My guide to
voltage, resistance, current, measuring them, etc.
Doing it digitally: I think my analogy for how digital circuits
work is unusual, and helpful for beginners. There is other introductory
material there too.
Home-made printed circuit boards: A sketch of how to make them with minimal expense and
bother.
Explanation of electricity/ electronics... plus some other topics about mathematics and science. Supposedly prepared for young learners, but useful to people of many ages, I suspect. If the link for that gets changed, look for "peter schmedding australia science"
===
If you want to 'make' digital circuits on a Win3.x or Win95 simulator, consider the shareware products reviewed here.... and consider Virtual Workbench (see next item)....
===
I haven't tried it, but from experience of their other FREE
product (Logo for Windows.. 16 & 32 bit versions. Very good, big,
professional... don't tell them I said so, but they should charge for
it!), this product will be excellent. Virtual Workbench's site will tell you more. As I understand it, the program allows you to 'draw'
electronic circuits on your screen, complete with various meters, and
then 'see' how the circuit would behave if you made it 'for real'. It
seems to be oriented towards logic circuits, I don't know if it also
handles analogue. Thirty day free trial (full function), $35 to use
after that, $99 for site license.
===
If you don't know what a "breadboard" (electronic type!) is, consider getting one, if you are playing about with making up circuits.
They are a useful little beast consisting of a half inch thick plastic block with lots of little holes into which you can poke solid (not stranded) wires.
The 'secret' is that bunches of those holes are connected. (But not EVERY hole is connected to every other!! Not every breadboard is configured as below, but generally...)
Imagine the block of plastic in front of you with the long dimension going left/ right. There's probably a channel or gap about halfway 'up' (i.e. away from you) the board. Call a bunch of holes running 'up' the board a column. All the holes in the half of a column above the channel are connected. All the holes in the half column below the channel are connected.
Oh yes... and there is probably a row or two across the 'top' and 'bottom' that are connected to one another but not their columns. These can be used for anything, but are generally used for the positive and negative (usually called 'zero') voltages from the battery or psu you are using to power whatever you're making. Get in the habit of connecting the top row to the positive voltage. The rows of holes for the power supply are called the power 'rails', both in their physical manifestation on the breadboard, and in their logical existence in more abstract things, like circuit diagrams.
Breadboards are only for low voltage things, say up to maybe 20v... NOT household electricity, i.e. 110v in US, 230v in UK.
Surface Mount Devices and the hobbyist
We are seeing more and more ICs being produced in surface mount packages. How does a hobbyist work with these?
If you have everything for making your own PCBs with computer generated artwork... I envy you. Even then, you may not want to make a pcb every time you use an smt device.
Happily, thanks to the Usenet, I finally found someone manufacturing the obvious solution. It is a very small (1.2 x 0.6 inch) pcb with pads in the center for sioc smt devices. I think it will also work with some tsoc devices I've recently bought. Soldering the device to the tiny pads will be a challenge, but do-able. From the tiny pads for the smt, tracks lead out to pads of more manageable dimensions. Just what we needed! A dozen cost me $17.24, including p&p, etc. ($5 of that was a small order surcharge, waived if your order goes over $25... very reasonable, really.)
Furthermore, the supplier was a delight to do business with. The PCBs are part of a range called "Surfboards". The one for soics is part number 9081CA-ND.
I've had a lot of fun, learned a lot of electronics from the British magazine Everyday with Practical Electronics. The articles by Robert Penfold have hit my interests especially well.
Ad from page's editor: Yes.. I do enjoy
compiling these things for you... hope they are helpful. However..
this doesn't pay my bills!!! If you find this stuff useful, (and you
run an MS-DOS or Windows PC) please visit my freeware and shareware
page, download something, and circulate it for me? Links on your page
to this page would also be appreciated!
Here is how you can contact this page's editor.
Click here to go up to general 'electronics'
page by editor of this page
Click here to go to editor's homepage
Page tested for compliance with INDUSTRY (not MS-only) standards, using the free, publicly accessible validator at validator.w3.org
Why is there a hidden graphic on this page? I have my web-traffic monitored for me by eXTReMe tracker. They offer a free tracker. If you want to try one, check out their site. Neither my webpages nor my programs incorporate spyware.
Page tested for compliance with INDUSTRY (not MS-only) standards, using the free, publicly accessible validator at validator.w3.org
Bookmark this on Delicious
Recommend to StumbleUpon